DATAMAX PASSTHRU DRIVER

In general, the Windows printing system is fairly reliable, but it can cause trouble. This is what attaches the ticket to the ticket printer. Take the stock out, turn the stack upside down, and put it back in. If this happens to a printer, look in section 4. The solution is to adjust the top offset. Many times, the Windows text drivers give problems that can be fixed by sending the proper codes to the printer. My feeling is that my problem lie actually within the setup of the print queue within AIX, but I might be wrong.

Uploader:	Musida
Date Added:	6 September 2014
File Size:	65.88 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	15078
Price:	Free* [*Free Regsitration Required]

Before the start of the next print job, it gets pulled back dqtamax so the ticket can print from edge to edge. Therefore, the black line must be on the bottom left edge of the ticket stock when it comes out. Seagull Scientific is a good source for print drivers for all kinds of printers.

Setting up a Datamax E-4205e

After completing the steps above, unload the ticket stock and turn the printer off. Occasionally, a printer will ignore the black line sensor and insist on using the edge gap dxtamax. One step this document fails to make clear is that you must press F3 after each adjustment to issue a new test feed before saving by holding the F3 button or your changes will be lost. You may leave the report printer field empty if you are using this station for ticketing only.

Accept all the defaults from here on and the printer will be installed. You probably have the stock in backwards. If not, you probably are feeding the stock from the wrong end passtgru the stack. Passthr driver must be installed on every printer with a Datamax printer attached. The Pass Through driver is also useful with other printers if you are using a Windows printing format.

Printing to Datamax Thermal Label Printer in UNIX

Set the top offset to be —1. Select the Features tab.

Press the Feed button again. Always close and lock in place the print head then feed your tickets to load your printer.

However, once the application is deployed on to the AIX Server, only the Laser Printer works, the label printer flashes to show that it receives the data, but nothing is produced. When you close the cover, here is how it should look.

Setup for Datamax Ticket Printers

Hello, I'm data,ax sure if the problem I am hitting is directly related to JasperReports, but thought I would post it here to see if any of you guys can help me. You must change this setting to stock ID 0 to work with your Sensible Cinema ticket stock.

It should be on the perforation. This is so that your printer begins printing the instant you sell a ticket rather than after a considerable delay while fonts download to your printer. If you are doing reports on this computer you must install the driver for your report printer before completing this next step. Management security access is usually required in order to use this capability of the software.

Click on the Have disk button. It just passes the codes to the printer. Occasionally, a printer will need to be reset to factory defaults. Products Solutions Services Resources. You still need to set the paper size, orientation, label mark, and black line offset.

You will probably want it as a local printer. The small bundle of tickets included with the printer dataamax not be used with our software but will be used when setting up your printer for the first time. Then, hold down F1 and F3 while turning it on. The title of the show gets sent to the printer like this: Is it consistently dark, across the ticket?

USB printers will not respond. With the Datamax printer codes, you need to know where the start point is. These settings are guidelines.